Skip to content
English
Sign in
Contact us
  • There are no suggestions because the search field is empty.

PP2105 ATLAS 6. MY 2021 to 2025 - Retrofitting EQP Parts

Converting from Non-EQP to EQP is fundamentally possible, but there are a few things to consider:

In our EQP model, we use narrower tires due to the fenders.The fenders are only suitable for tires up to a maximum of 40 mm while the non-EQP model is factory-equipped with 45mm tires. We strongly recommend the combination of the luggage rack and fender, as the fender could otherwise cause noise.

The part numbers for the necessary components are:

  • ATLAS SERIES CARRIER SET: 313029700
  • ATLAS 6-SERIES FENDER KIT FRONT AND REAR: 311030700
  • TOP TUBE BAG: 551000000

Additionally, the EQP model comes factory-installed with dynamo-powered lighting.

If this is of interest, the front wheel would need to be re-spoked to an appropriate dynamo front hub, which is manufactured by "Shutter Precision" as an OEM part for our fork with the Road Boost standard (110x12mm).

The part number for the hub is: 469004200

The corresponding lighting is fully sourced from the manufacturer "Herrmans" and can be found on the open market if needed.

For our ATLAS 6.7 EQP, we use the following lighting:

  • Front Light: Herrmans H-Black MR8, LED
  • Rear Light: Herrmans H-Trace Mini, LED